- Hauppauge Wintv Hvr 950q Drivers
- Hauppauge Wintv Hvr 950 Mac Drivers Download
- Hauppauge Wintv Hvr 950 Mac Drivers Update
Note: If you have run HCWCLEAR, you must reboot your PC and leave the WinTV-HVR-950 installed. After a reboot you will see the Found New Hardware Wizard installation message, hit Cancel. then continue below.
Note: to use the WinTV-HVR-950 with Microsoft's Vista Media Center application, you need the WinTV-HVR driver and SoftMCE.
WinTV v8 application and TV tuner driver download package
This is WinTV v8, which can be used if you have a WinTV v7 CD-ROM. If you have a WinTV v8 Activation Code, you can upgrade to WinTV v8.5 at no cost.
Installation notes for WinTV v8:
Hauppauge wintv hvr 950 free download - Hauppauge Tuner WinTV HVR1200.zip, Hauppauge WinTV NOVA Adapter, Hauppauge WinTV NOVA Adapter, and many more programs. Hauppauge thinks outside the box with their WinTV-HVR-950. This external TV tuner connects to your computer with a USB 2.0 connection so you don't have to open your case to get TV on your PC. Hauppauge + Plex Pass = Live TV and DVR! Plex Live TV & DVR now supports the Hauppauge WinTV-dualHD, WinTV-quadHD, WinTV-HVR-955Q and Xbox TV tuners. Hauppauge TV tuners are now supported for Plex Pass users on Plex Windows and Linux servers. See more about Plex Live TV and DVR. Download the WinTV-HVR-900 driver update. Unzip this file to a directory you will remember, such as WINTV. It will create a new folder. To install, open the folder. Run HCWDRIVERINSTALL.EXE. This will install the WinTV-HVR base driver. At the completion of the driver install you should see a message which says Drivers have been updated.
WinTV v8 is primarily for the Hauppauge WinTV-HVR-850, WinTV-HVR-950, Colossus (not Colossus 2), HD PVR model 1212, WinTV-HVR-1150, WinTV-HVR-1500 or WinTV-HVR-1600. WinTV v8.5 does not support these products.
Activation for this version of WinTV v8 is done with your WinTV v7 CD-ROM or WinTV v8.5 Activation Code.
Download the WinTV-HVR-1100 Windows driver above. Double click the downloaded driver. This will install the WinTV-HVR-1100 Windows driver. At the completion of the driver install, you should see a message which says Drivers have been updated successfully. At this point, the Windows driver will be installed.
WinTV v10 Activation Code: If you do not have a WinTV v8/8.5 Activation Code, you can purchase the new WinTV v10 Activation Code on the Hauppauge webstore for $12.95. This can be used with all products supported by WinTV v8 and WinTV v8.5
WinTV v8 installer
For Windows 10, 8, and 7
For Windows 10, 8, and 7
File name: wintv8setup_35167.exe | File size: 108 MB | Date: June 23, 2017
Release notes | Backup download site
Release notes | Backup download site
This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v8 application and utilities.
To install the WinTV v8 application
- Download the WinTV v8 installer to your PC. After downloading this file, it's normally saved in the Download directory on your PC
Note: If you see a message Run or Save?, click Save. - Have your WinTV Activation Code ready or insert your original valid WinTV v7 CD
- Run wintv8setup from the Download directory on your PC
- At Activation required, click Check WinTV CD if you have a WinTV v7 CD or click Enter Serial Number and then enter your WinTV Activation code.
This will complete the driver and application installation for your WinTV.
To install WinTV v8 on a PC or laptop without a CD-ROM drive
If your PC or laptop does not have a CD-ROM drive, do the following:
- At the conclusion of the installation a dialog box will pop up saying 'Activation required'
- Click Enter Product Code
- You will find the Product code on your WinTV v7 Installation CD
- Enter the Product code including dashes and dots
To find your Product Code
Look at the following guide for finding your product code
Note: If you have a WinTV v7.2 CD-ROM with Extend, the latest version of WinTV v8 with Extend will also be installed.
Setting up your TV tuner in Windows 7 Media Center
Windows Media Center remote control receiver/blaster configuration utility
Use this utility to enable or disable the built-in IR receiver/blaster hardware on the WinTV-HVR-1850 and WinTV-HVR-2250 for use with Windows Media Center. You would disable the built-in IR receiver/blaster if you are using an external USB attached Windows Media Center remote control.
To use this tool:
- Download, unzip and install the Hcwcirconfig tool
- After installing the Hcwcirconfig tool, run the program. The tool will be located in Start / All Programs / Hauppauge WinTV / HCWCIRConfig Tool
- To configure as a Windows Media Center remote control, put a check in the box labeled Hauppauge Consumer Infrared Receiver click OK – Save Changes.
- Your computer must be restarted for the changes to take effect.
Name: hcw_circonfig_tool_1.2.28165.zip
Name: 322KB
Name: 6/16/2010
Name: 322KB
Name: 6/16/2010
Bug fixes for the Windows Media Center 'Low bit rate' error message
Microsoft has released Windows Media Center patches for the 'Low bit rate' error message.
Click to view the information from Microsoft.
Click to view the information from Microsoft.
Remapping clear QAM channels in Windows 7 Media Center
WinTV Digital Signal Strength Indicator
York 2001 home gym exercise manual. The WinTV Digital Signal Strength indicator displays information about the quality of the digital TV channel you are watching. This application is used with the WinTV v10, 8 and v7 applications.
The WinTV Digital Signal Strength must be used with one of the Hauppauge WinTV applications. It cannot be used stand alone.
Click here for instructions on using this application.
IR Remote control application
Remote control applet. After you run this applet, an icon will appear in your Windows device tray showing that the Hauppauge remote control is active.
Name: 2.71.33113_IR32.exe
Size: 450KB
Updated: April /2015
Size: 450KB
Updated: April /2015
WinTV-Scheduler update for WinTV version 6
This TV program scheduler for WinTV version 6 allows 'background recording' on dual tuner WinTV products.
Name: sched25_26071.exe
Size: 3.8 MB
Updated: March 11, 2008
Size: 3.8 MB
Updated: March 11, 2008
Soft MCE driver
This file is required for analog TV in Windows Media Center.
Name: softmce_setup.exe
Size: 2.2 MB
Updated: 4/14/2010
Size: 2.2 MB
Updated: 4/14/2010
Is a free Personal Video Recorder (PVR) and Media Centre application for Microsoft Windows.
SnapStream Beyond TV™ 4 : 'Proving that a PC can rival TIVO' !
- Supports the latest Hauppauge TV tuners.
- Record more than one show at the same time or watch one while recording another with multi-tuner support
- Record an entire TV series Record one show, every episodes, or only new episodes of your favorite show
- Enjoy the full screen interface Choose shows and setup recordings from the comfort of your couch
- Easily find shows using the integrated Electronic Program Guide (EPG)
- Record and watch HDTV shows with over-the-air HD support on the WinTV-HVR-1250
- Skip commercials with SmartSkip™
- Find shows faster with the new browse by category feature, or search by title or keyword
- No subscription fees
- Schedule recordings away from home via the Internet or a web-ready phone
What Operating Systems are supported by the WinTV-HVR-950?
- Microsoft Windows 10, 8, 7 (32 and 64 bit)
- Windows Vista (all versions), 32-bit and 64-bit
- Windows® XP, XP Pro or Windows XP Media Center Edition, with Service Pack 2 (or greater)
System Requirements
- Minimum processor recommended:
- 2.2 GHz P4 or 1.8 GHz Centrino or equivalent (minimum).
- 2.8 GHz processor for analog TV recording with MPEG-2 (minimum).
- Graphics display adapter with 64MB of memory (minimum).
- Sound card or system.
- USB 2.0 port (will not work with USB 1.1).
- CD-ROM drive (for Software installation).
Can I use the WinTV-HVR-950 with Media Center?
Yes, the WinTV-HVR-950 can be used in Windows XP MCE 2005, Vista Media Center or WIndows 7 Media Center. Simply download and install the latest MCE Kit from the Hauppauge website, which will install the driver and necessary 'Hauppauge MCE Soft Encoder'. Under Windows 7 only the driver is required, the Soft Encoder is included with the OS.
NOTE: You must set up an analog TV tuner in Media Center first before you can proceed to set up a digital tuner.
What type of channels will I receive with the WinTV-HVR-950?
NTSC Analog CableTV or over-the-air analog TV: You can use your cable TV from the wall to connect to the WinTV-HVR-950 and receive all of your basic Cable TV channels. You can also use a roof top antenna to receive 'over-the-air' TV.
ATSC over-the-air digital TV: Supports all ATSC formats, up to the high definition 1080i format!
NOTE: For ATSC digital TV, a rooftop/out door antenna is recommended for optimal results/signal strength.
Analog channels are MONO audio only.
Digital channels are STEREO.
Can I get HD with the WinTV-HVR-950 through my Cable or Satellite box?
No. The WinTV-HVR-950 has an ATSC over-the-air digital TV tuner built-in and supports all ATSC formats, up to the high definition 1080i format . The WinTV-HVR-950 will support ATSC broadcasts that are currently being transmitted over-the-air. It will not be able to decode HD broadcasts that come through your cable or satellite box. QAM is not supported.
What type of recordings can I make with the WinTV-HVR-950?
Using the WinTV 7 application the WinTV-HVR-950Q, will record in a transport stream (TS)
For ATSC and Clear QAM digital TV recordings, the recording format and bit rate is exactly the same as the broadcast format (i.e. ATSC 1080i is recorded at 1080i).
For NTSC analog cable TV recordings, our SoftPVR is used to create Transport Stream files (TS)
For ATSC and Clear QAM digital TV recordings, the recording format and bit rate is exactly the same as the broadcast format (i.e. ATSC 1080i is recorded at 1080i).
For NTSC analog cable TV recordings, our SoftPVR is used to create Transport Stream files (TS)
Note: TS files can be converted to MPEG files using options in the WinTV 7 configuration menu.
Note: The WinTV 6 application recording are in MPEG format for both digital and analog.
Note: Not all recordings made with ATSC/QAM signals are DVD compliant.
Can I record one show while watching another with the WinTV-HVR-950?
No. The WinTV-HVR-950 will only be able to record the program that is being viewed using the supplied software.
You will not be able to watch a digital channel and record an analog channel simultaneously or vice versa due to the fact there is only a single tuner on the WinTV-HVR-950.
SStream DShowError: 'Create Filters CLSID_MainConceptMPEGEncoder Class Not Registered (0x80040154)' error when attempting to record?
If using the WinTV 6 application this indicates that the 'Soft PVR' is not installed. To verify Soft PVR installation, look under control panel/add remove programs and you will see the Hauppauge WinTV Soft PVR. To reinstall SoftPVR, install the SoftPVRUpdate.exe from your WinTV CD ROM (located in the SoftPVR folder).
(Note: If a hardware encoder model WinTV is already installed on your system, this will prevent the SoftPVR from installing properly. In order to install SoftPVR in this case, go to device manager and temporarily disable the drivers for the WinTV hardware encoder product. Install the SoftPVR and once completed, you may re-enable the hardware encoder in the device manager.
Black video window or choppy video when watching a digital TV channel
If you are watching a digital TV channel and you see choppy video, no audio or a black screen, then it is possible your PC is not fast enough to decode and play the digital TV channel you are watching. Please verify that your system meets the minimum requirements for using the HVR-950Q
Digital TV, especially ATSC high definition digital TV, is very CPU intensive. Many graphics cards have special built-in hardware to speed up decoding of high definition TV channels.
On graphics cards without special video decoding features, you can often improve the playback performance by using the Video Renderer settings located in the settings menu of WinTV 7. To open the setting menu click on the “gear” button located in the lower left of the WinTV 7 screen.
The default mode is EVR. The other modes are VMR9, VMR7 and Overlay. Each mode uses a different process to render video. Try each mode and use the one which gives you the best results. To use hardware acceleration put a check in the box “use hardware acceleration when possible. This will allow your graphics system to use hardware acceleration for video decode. Note: graphics hardware acceleration does not work on all systems. After making a change in video rendering settings Wintv must be restarted to take effect.
If you are using WinTV 6 then the render options are part of a separate program called Primary. Changes in the Primary applet must be made with the WinTV application closed. Open the Primary program by going to Start – All Programs – Hauppauge WinTV – Primary. After making changes close the Primary applet and open the WinTV application.
Where can I find the optional AV cable?
The optional AV cable will be available through our Sales dept . Please contact [email protected] or look on our WEB store for more information on purchasing this optional cable.
WinTV crashes on a Dell Vostro desktop
If you experience a crash on the WinTV application when running on a Dell Vostro computer, check to make sure the speakers are plugged in. If speakers are not plugged in, the Dell Vostro disables the internal sound card. The WinTV application requires a sound card to be enabled to operate correctly.
How do I enable my remote control so it will work with the WinTV-HVR-950?
The IR software should be installed by default. To check look for a small remote control icon in the Windows task bar on the lower right. IF it is not present you can reinstall Wintv from the installation CDROM or download IR32.EXE from our support web site. The remote control must also have “line of sight” with the HVR-950Q. The IR receiver of the HVR-950Q is the round bulb on the side of the unit.
I receive a 'Low bit rate' error message when using Windows Media Center in Windows 7.
Microsoft has released Windows Media Center patches for the 'Low bit rate' error message.
Click to view the information from Microsoft.
Click to view the information from Microsoft.
WinTV v7 does not open or opens and then disappears?
This can be caused by a corrupt Channel database so you will need to uninstall and reinstall. First you need to go to start, all programs, Hauppauge Wintv and in that folder run
“uninstall Wintv7” (or remove Wintv7 using control panel 'add/remove programs) then you need to remove the backup channel database.
“uninstall Wintv7” (or remove Wintv7 using control panel 'add/remove programs) then you need to remove the backup channel database.
Windows Vista, 7 and 8 go to C:program data ( this folder is a hidden folder so if you do not see it you need to “show hidden folders “ in your search
Options) once you can get to this folder you will see a folder label “Hauppauge” delete this folder.
Options) once you can get to this folder you will see a folder label “Hauppauge” delete this folder.
Windows XP go to C:documents and settingsall usersshared documentsapplication data ( this folder is a hidden folder so if you do not see it you need to “show hidden folders “ in your search Options) once you can get to this folder you will see a folder label “Hauppauge” delete this folder.
Then download the latest version of Wintv7 located in the support section of the website and reinstall (note: you must have your original CD to validate the download.)
Are you getting error messages 'Setup could not detect your product', TV Tuner not available' or 'Unable to locate capture filter' after Windows 10 installed an update?
This is a known 'feature' of the new release of Windows 10, related to video cameras but also affecting TV tuners and video recorders.
The latest versions of WinTV v10, v8.5, WinTV v8 and Hauppauge Capture automatically update the Windows 10 drivers to fix this error message. If you need to manually fix this, click here.
Questions or problems? Please contact Hauppauge support at: [email protected]
- Prodinfo: get information on your Hauppauge TV tunerProdinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe
- HCWClear: remove the Hauppauge driver and applications from your PCHCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.
How to find the product code of your Hauppauge product:
Hauppauge product codes on WinTV boards are normally found on the TV tuner. This is a five digit number normally followed by a revision (REV). You need to look at the first two numbers to determine the product type. The other numbers are related to the accessories which are on the product.
On the MediaMVP, WinTV-USB and other 'boxes', the product code is normally on a label on the bottom of the case.
204109 WinTV-dualHD
203029 WinTV-soloHD
203xxx Xbox One Digital Tuner
203xxx PCTV Triple Stick 292e
166XXX WinTV-quadHD
160XXX WinTV-HVR-1975
161xxx WinTV-HVR-1265 Scanmaster elm crack keygen software.
15XXX WinTV-HVR-5525
159xxx WinTV-MiniStick2
73XXX WinTV-HVR-1900
151XXX WinTV-HVR-2215_2205
89XXX WinTV-HVR-2200_2210
650XXX WinTV-HVR-900_930
1111XX WinTV-Analog Stick
94XXX WinTV-HVR-1100
67XXX WinTV-HVR-1110
22XXX WinTV-HVR-1200
26XXX, 25XXX WinTV-PVR-150
23XXX, 23XXX WinTV-PVR-500
164XXX HD PVR60
Hauppauge Wintv Hvr 950q Drivers
157XXX HD PVR Gaming Edition Plus
157XXX HD PVR2
157XXX HD PVR Gaming
158xxx HD PVR Rocket
131xxx Colossus
152XXX Colossus2
711XX Impact VCB-PCI-E
122XXX USB-Live2
64XXX Impact VCB-PCI
110XXX MediaMVP-HD
49XXX HD PVR
38XXX WinTV-PCI
44XXX WinTV-Go
64XXX WinTV-PCI-FM
34XXX 88X based WinTV boards
86XXX MediaMVP
48XXX WinTV-PVR-250-350
32XXX WinTV-PVR-250
30XXX WinTV-PVR-250
Hauppauge has a new SDK available for .NET applications. The SDK simplifies the development of TV applications in .NET. The SDK makes it easy for applications to perform functions like querying the available channels, start watching a channel in an application supplied window, pause/play, adjust volume, display OSD graphics, record live tv to a file, etc.
Hauppauge Wintv Hvr 950 Mac Drivers Download
The SDK is provided under NDA and can be requested at [email protected] or [email protected]
Hauppauge Wintv Hvr 950 Mac Drivers Update
Windows 10 Anniversary Update requires special drivers to avoide errors during the Hauppauge product installation. Here are the updated drivers which can be used with the Windows 10 Anniversary Update
Note: these drivers are included in the Intel dh67bl drivers for windows 10.
WinTV v8 installer, version 34245 or later
- WinTV-dualHD and WinTV-soloHD
- WinTV-HVR-955Q, WinTV-HVR-950Q, WinTV-HVR-955C
- Xbox One TV tuner (ATSC)
- WinTV-HVR-2255, WinTV-HVR-2215, WinTV-HVR-2205, WinTV-HVR-2200, WinTV-HVR-2250
- WinTV-HVR-1975, WinTV-HVR-1955, WinTV-HVR-1950
- WinTV-quadHD, WinTV-HVR-1265, WinTV-HVR-1250
- HD PVR 2 (all models)
- Colossus2
- HD PVR 60
- WinTV-NOVA-S-USB2, WinTV-NOVA-HD-USB2
- WinTV-Nova-T stick, WinTV-Duet, WinTV-Nova-TD